CAN Communication System
TERMINALS OF ECUHINT: This section describes the standard CAN values for all CAN related components.
1. WIRING HARNESS CONNECTOR (CAN J/C1, CAN J/C2).
Terminals Of ECU:
a. CAN J/C1.
1. Distinguish the CAN J/C1 connectors by the color of the bus lines and the location of the connector.
NOTE: Confirm the side of the connector (A side or B side) where the wires are connected. All terminals on the same side work equally.
b. CAN J/C2.
1. Distinguish the CAN J/C2 connectors by the color of the bus lines.
c. The terminals on connectors for the CAN J/C
d. WIRING DIAGRAM FOR IDENTIFYING CAN J/C CONNECTORS
Terminals Of ECU:
Pinouts:
2. DLC3
HINT: To inspect values
Terminals Of ECU:
Pinouts:
3. SKID CONTROL ECU
a. Terminals.
HINT: To inspect values
Terminals Of ECU:
Pinouts:
4. STEERING SENSOR
a. Terminals.
HINT: To inspect values
Terminals Of ECU:
Pinouts:
5. YAW RATE SENSOR
a. Terminals.
HINT: To inspection values