Airbag Assembly Connectors

DISCONNECTION
a. While holding both outer flank sides, slide the outer to the direction shown by the arrow.
b. When the connector lock is released, the connectors are disconnected.

HINT: Be sure to hold both outer flank sides.If the top and bottom sides are held, it will obstruct disconnection.




CONNECTION
a. Align the male connector (on the side of sensor) and female connector in the same direction as shown in the illustration and connect them without rubbing together.
b. Be sure to insert the connectors until they are locked.After connecting them, pull them slightly to check that they are locked.(When locking, make sure that the outer returns to its original position and a click sound can be heard.)

HINT: When connecting them, the outer slides.Be sure not to hold the outer while connecting, as it may result in an insecure fit.