Oil Pump, Engine

Install the oil pump with the 9 bolts. Tighten the bolts uniformly in several steps.
Torque:
Bolt A 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B 20 Nm (199 kgf-cm, 14 ft. lbs.)
Bolt C 43 Nm (439 kgf-cm, 32 ft. lbs.)

Vane pump assy x Pump bracket 43 Nm (439 kgf-cm, 32 ft. lbs.)
Vane pump assy x Adjust strut 43 Nm (439 kgf-cm, 32 ft. lbs.)
Crankshaft position sensor x Oil pump assy 8.0 Nm (80 kgf-cm, 71 inch lbs.)
Timing belt plate x Oil pump assy 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Chain tensioner assy No. 1 x Oil pump assy 27 Nm (280 kgf-cm, 20 ft. lbs.)
Timing belt No.1 cover x On pump assy 8.5 Nm (87 kgf-cm, 75 inch lbs.)
Oil pump assy
at idle speed 29 kPa (0.3 kgf/cm2, 43 psi) or more
at 3,000 rpm 245 to 539 kPa (2.5 to 5.5 kgf/cm2, 36 to 78 psi)
Oil pump assy
Top clearance
Standard 0.11 to 0.24 mm (0.0043 to 0.0094 inch)
Maximum 0.35 mm (0.0138 inch)
body clearance
Standard 0.125 to 0.162 mm (0.0050 to 0.0064 inch)
Maximum 0.30 mm (0.0118 inch)
Side clearance
Standard 0.03 to 0.09 mm (0.0012 to 0.0035 inch)
Maximum 0.15 mm (0.0059 inch)
Oil pump assy x Cylinder block
Bolt A 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B 20 Nm (199 kgf-cm, 14 ft. lbs.)
Bolt C 43 Nm (39 kgf-cm, 32 ft. lbs.)
Crankshaft position sensor x Oil pump assy 8.0 Nm (80 kgf-cm, 71 inch lbs.)
Oil pump rotor set x Oil pump assembly 10 Nm (105 kgf-cm, 8 ft. lbs.)
Oil pump relief valve plug x Oil pump body 49 Nm (500 kgf-cm, 36 ft. lbs.)