Multiplex Tilt & Telescopic ECU

Part 1 Of 2:

Part 2 Of 2:

MULTIPLEX TILT & TELESCOPIC ECU
REPLACEMENTS
1. PRECAUTION
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. REMOVE FRONT DOOR SCUFF PLATE LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
5. REMOVE INSTRUMENT PANEL AIR BAG ASSY LOWER NO.1
6. REMOVE MULTIPLEX TILT & TELESCOPIC ECU
a. Disconnect the connectors from the multiplex tilt and telescopic ECU.
b. Using a socket wrench (+), remove the 2 screws and multiplex tilt and telescopic ECU.
7. INSTALL MULTIPLEX TILT & TELESCOPIC ECU
a. Using a socket wrench (+), install the 2 screws.
Torque: 1.5 Nm (15 kgf-cm, 13 inch lbs.)
b. Connect the connectors to the multiplex tilt and telescopic ECU

NOTICE:
^ The wire harness between the telescopic motor and ECU has same shape connectors at both ends.
^ When installing them, connect the connectors with the same color.

8. INSTALL INSTRUMENT PANEL AIR BAG ASSY LOWER NO. 1.
9. INSPECT SRS WARNING LIGHT