Without Scan Tool

DTC CLEAR (USING SST CHECK WIRE)

Clear the DTCs




1. Make sure the ignition switch is OFF.
2. Using the SST(s), connect terminals TC and CG of DLC3.
SST 09843-18040

3. Turn the ignition switch to the ON position.




4. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 sec.
5. Check that the height control OFF indicator lamp blinks a normal code.

HINT: If the fault has not been repaired, the DTC code may still be displayed.

6. Turn the ignition switch to the OFF position.
7. Remove SST(s) from DLC3.
SST 09843-18040

HINT: Disconnecting the battery cable during the operation will not erase DTCs in the ECU.