Manual Shifting Test

MANUAL SHIFTING TEST






HINT:
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
- If any abnormalities are found in the following test, the problem is in the transaxle itself.

a. Disconnect the connector of the transmission wire.




b. Gate shift lever type:
Drive with the transmission wire disconnected. Shifting the shift lever in the order of L, 2, 3, 4 and D position to check whether the shifting condition changes the table.

HINT: When driving with the transmission wire disconnected, the shift lever position is in L or 2, the gear position is held in 3rd and the shift lever position is in 3, 4 or D, the gear position is held in 4th. However, when the shift position is in R or P, the operation is same as usual.




c. Multi-mode shift lever type:
Drive with the transmission wire disconnected. Shifting the shift lever to the D position to check whether the shifting condition changes the table.

HINT: When driving with the transmission wire disconnected, the shift lever position is in D, the gear position is held in 4th. However, when the shift position is in R or P, the operation is same as usual.

d. Connect the connector of the transmission wire.
e. Clear the DTC.