Accelerator Pedal Position Sensor: Service and Repair

ACCELERATOR PEDAL ASSY (3MZ-FE (NORMAL PEDAL))
REPLACEMENT
1. DISCONNECT ENGINE WIRE NO.3 (BATTERY NEGATIVE TERMINAL)





2. REMOVE ACCELERATOR PEDAL ASSY
(a) Disconnect the accelerator position sensor connector.
(b) Remove the 2 bolts, then remove the accelerator pedal rod.
3. INSTALL ACCELERATOR PEDAL ASSY
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
4. CONNECT ENGINE WIRE NO.3 (BATTERY NEGATIVE TERMINAL)
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
5. SYSTEM INITIALIZATION