Crankshaft, Engine

Crankshaft thrust clearance
Standard 0.04 to 0.24 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Crankshaft circle runout
Maximum 0.06 mm (0.0024 inch)
Main journal diameter 60.988 to 61.000 mm (2.4011 to 2.4016 inch)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crank pin diameter 52.992 to 53.000 mm (2.0863 to 2.0866 inch)
Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crankshaft oil clearance
Standard
No. 1 and No. 2 journals 0.014 to 0.034 mm (0.0006 to 0.0013 inch)
No. 3 and No. 4 journals 0.026 to 0.046 mm (0.0010 to 0.0018 inch)
Maximum
No. 1 and No. 2 journals 0.05 mm (0.0020 inch)
No. 3 and No. 4 journals 0.06 mm (0.0024 inch)
Drive plate & ring gear sub-assembly x Crankshaft 83 Nm (846 kgf-cm, 61 ft. lbs.)