Dashboard / Instrument Panel: Service and Repair
REPLACEMENT
1. TABLE OF BOLT, SCREW AND NUT
HINT: The bolts, screws and nuts, which are necessary for installation and removal of the instrument panel, are shown in the illustration with alphabets
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
5. REMOVE CONSOLE UPPER PANEL GARNISH NO.2
a. Disengage the 3 clips and remove the console upper panel garnish No.2.
6. REMOVE CONSOLE UPPER PANEL GARNISH NO.1
a. Disengage the 4 clips and remove the console upper panel garnish No.1.
7. REMOVE CONSOLE PANEL UPPER ASSEMBLY
a. Disengage the 11 clips and remove the console panel upper assembly, then disconnect the connectors.
8. REMOVE INSTRUMENT PANEL GARNISH SUB-ASSEMBLY LH
a. Using a moulding remover, disengage the 7 clips as shown in the illustration.
b. Disconnect the connector and remove the instrument panel garnish sub-assembly LH.
9. REMOVE INSTRUMENT PANEL GARNISH SUB-ASSEMBLY RH
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER
a. Disengage the 5 clips and remove the instrument cluster finish panel center lower, then disconnect the connectors.
11. REMOVE INTEGRATION CONTROL & PANEL ASSEMBLY
12. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
a. Disengage the 2 clips and the 5 claws, and then remove the console rear end panel sub-assembly.
b. Disconnect the connectors.
13. REMOVE RR CONSOLE BOX ASSEMBLY
a. Remove the 2 bolts
14. REMOVE CONSOLE BOX INSERT FRONT NO.2
a. Disengage the 2 claws.
b. Pull the console box insert front No.2 rearward to remove it.
15. REMOVE CONSOLE BOX INSERT
16. REMOVE CONSOLE UPPER PANEL GARNISH FRONT
a. Disengage the 5 clips and remove the console upper panel garnish front, then disconnect the connectors.
17. REMOVE CONSOLE BOX LOWER
a. Remove the 2 bolts
b. Remove the 2 screws
18. REMOVE STEERING WHEEL COVER LOWER NO.2
19. REMOVE STEERING WHEEL COVER LOWER NO.3
20. REMOVE HORN BUTTON ASSEMBLY
21. REMOVE STEERING WHEEL ASSEMBLY
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
22. REMOVE STEERING COLUMN COVER
23. REMOVE TURN SIGNAL SWITCH ASSEMBLY W/SPIRAL CABLE SUB-ASSEMBLY
24. REMOVE FRONT DOOR SCUFF PLATE LH
25. REMOVE FRONT DOOR SCUFF PLATE RH
26. REMOVE FRONT FLOOR FOOTREST
a. Disengage the 2 claws and remove the front floor footrest.
27. REMOVE COWL SIDE TRIM BOARD LH
a. Remove the clip.
b. Disengage the 2 clips and remove the cowl side trim board LH.
28. REMOVE COWL SIDE TRIM BOARD RH
29. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1
a. Remove the screw
b. Disengage the 2 clips and the claw, and then remove the instrument panel under cover sub-assembly No.1.
30. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
a. Disengage the 2 clips and remove the instrument cluster finish panel ornament.
31. REMOVE SWITCH HOLE BASE NO.1
32. REMOVE INSTRUMENT PANEL FINISH PLATE
a. Remove the instrument panel finish plate.
33. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH
a. Remove the S bolts
b. Disconnect the hood lock control cable assembly and the fuel lid lock control cable sub-assembly.
c. Disengage the 4 clips.
d. Disconnect the connectors and remove the instrument panel finish lower panel RH.
34. REMOVE INSTRUMENT PANEL LOWER LH
a. Remove the 3 bolts
35. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
a. Remove the 2 clips.
b. Disengage the 2 clips and remove the instrument cluster finish panel sub-assembly.
36. REMOVE COMBINATION METER ASSEMBLY
a. Remove the 4 screws
b. Loosen the 2 bolts and remove the combination meter assembly.
37. REMOVE INSTRUMENT PANEL REGISTER ASSEMBLY NO.1
a. Remove the screw
b. Disengage the 3 claws and remove the instrument panel register assembly No.1.
38. REMOVE INSTRUMENT PANEL UNDER COVER NO.2
a. Remove the screw
b. Disengage the 3 clips and remove the instrument panel under cover No.2.
39. REMOVE INSTRUMENT PANEL ORNAMENT
a. Disengage the 4 clips and remove the instrument panel ornament.
40. DISCONNECT PASSENGER AIRBAG CONNECTOR
41. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
a. Remove the 5 screws
b. Disengage the 2 clips and remove the glove compartment door assembly, then disconnect the connectors.
42. REMOVE INSTRUMENT PANEL REGISTER ASSEMBLY NO.2
43. REMOVE DISC PLAYER CHANGER W/BRACKET (W/ DISC PLAYER CHANGER)
44. REMOVE ASSIST GRIP ASSEMBLY
45. REMOVE FRONT PILLAR GARNISH LH
46. REMOVE FRONT PILLAR GARNISH RH
47. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY W/DEFROSTER NOZZLE DUCT
a. Remove the 9 bolts
b. Disconnect the connectors.
c. Remove the instrument panel safety pad sub-assembly W/ defroster nozzle duct.
48. REMOVE DEFROSTER NOZZLE ASSEMBLY
a. Remove the 5 screws and defroster nozzle assembly
49. REMOVE HEATER TO REGISTER DUCT NO.3
a. Remove the 2 screws and heater to register duct No.3.
50. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.1
51. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.2
52. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
53. REMOVE INSTRUMENT PANEL WIRE NO.3
54. REMOVE CONNECTOR NO.2 HOLDER
55. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY NO.1 (W/ 12 SPEAKER)
56. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY FRONT (W/ 12 SPEAKER)
57. REMOVE ANTENNA CORD SUB-ASSEMBLY
58. REMOVE NAVIGATION ANTENNA ASSEMBLY (W/ NAVIGATION SYSTEM)
59. REMOVE INSTR PNL PASS L/DOOR AIR BAG ASSEMBLY
60. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
61. INSTALL INSTR PNL PASS L/DOOR AIR BAG ASSEMBLY
62. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY W/DEFROSTER NOZZLE DUCT
a. Using a torque wrench, install the bolt .
Torque: 20 Nm (204 kgf.cm, 14 ft.lbf)
63. INSTALL COMBINATION METER ASSEMBLY
a. Pull the check pin backward while pressing the check pin with a flat-head screwdriver as shown in the illustration.
b. Check that the wire harness connector is engaged in the instrument panel safety pad installation position.
c. Install the 4 screws in order as shown in the illustration.
d. Tighten the 2 connector fitting bolts until a clicking sound can be heard.
e. After tightening, check that the check pin protrudes.
64. ADJUST SPIRAL CABLE SUB-ASSEMBLY
65. INSTALL STEERING WHEEL ASSEMBLY
66. INSTALL HORN BUTTON ASSEMBLY
67. INSPECT HORN BUTTON ASSEMBLY
68. INCLINATION SENSOR 0° CORRECTION
69. INSPECT SRS WARNING LIGHT