ABS Warning Light Circuit (Does Not Come on)

ABS WARNING LIGHT CIRCUIT (DOES NOT COME ON)

CIRCUIT DESCRIPTION

If any of the following is detected, the ABS warning light remains on.
- The skid control ECU connectors are disconnected from the skid control ECU.
- There is a malfunction in the skid control ECU internal circuit.
- There is an open in the harness between the combination meter and skid control ECU.

HINT: There is a case that the hand-held tester cannot be used when the skid control ECU is abnormal.

Wiring Diagram:

Step 1 - 2:

Step 3:

INSPECTION PROCEDURE

NOTE: When replacing the master cylinder solenoid, perform zero point calibration.