Oil Pump Seal Replacement
REPLACEMENT1. REMOVE TIMING BELT
2. REMOVE CRANKSHAFT TIMING PULLEY
a. Using SST, remove the timing pulley.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)
NOTICE: Do not turn the timing pulley.
3. REMOVE OIL PUMP SEAL
a. Using a knife, cut off the oil seal lip.
b. Using a screwdriver, pry out the oil seal.
NOTICE: Be careful not to damage the crankshaft.
HINT: Tape the screwdriver tip before use.
4. INSTALL OIL PUMP SEAL
a. Apply MP grease to a new oil seal lip.
b. Using SST and a hammer, tap in the oil seal until its surface is flush with the oil pump body edge.
SST 09316-60011 (09316-00011)
5. INSTALL CRANKSHAFT TIMING PULLEY
a. Align the timing pulley set key with the key groove of the pulley.
b. Using SST and a hammer, tap in the timing pulley with the flange side facing inward.
SST 09223-46011
6. INSTALL TIMING BELT