Headlamp: Service and Repair
REPLACEMENT1. REMOVE RADIATOR SUPPORT SEAL UPPER
2. REMOVE FRONT BUMPER GUARD
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER LINER LH
5. REMOVE FRONT BUMPER COVER
6. REMOVE LH HEADLAMP ASSEMBLY
a. Remove the 3 screws.
b. Disconnect the each connector.
c. Pull out the headlamp unit forward, then disengage the bracket on the body side.
7. REMOVE HEADLAMP, NO.1 BULB
a. Rotate the headlamp No.1 bulb in the direction of the arrow and pull it off toward the rear of the vehicle.
8. REMOVE HEADLAMP, NO.2 BULB
a. Rotate the headlamp No.2 bulb in the direction of the arrow and pull it off toward the rear of the vehicle.
9. REMOVE HOOD TO FRONT END PANEL SEAL NO.1
10. REMOVE HEADLAMP UNIT ASSEMBLY LH
a. Remove the headlamp cord with 3 bulbs
b. Remove the headlamp unit assembly LH.
11. INSTALL FRONT FENDER LINER RH
12. INSTALL FRONT FENDER LINER LH
13. ADJUST HEADLIGHT AIM ONLY
14. PUT VEHICLE IN THESE CONDITIONS
a. Correct tire inflation pressure.
b. Engine is running.
15. ADJUST FOG LIGHT AIM