Air Switching Valve
REPLACEMENT1. PREVENT GASOLINE FROM SPILLING OUT
2. DRAIN ENGINE COOLANT
3. REMOVE V-BANK COVER SUB-ASSEMBLY
4. REMOVE AIR CLEANER HOSE ASSEMBLY
5. DISCONNECT FUEL HOSE
6. DISCONNECT FUEL HOSE NO.2
7. DISCONNECT CONNECTORS FROM INTAKE MANIFOLD
8. DISCONNECT HOSES FROM INTAKE MANIFOLD
9. REMOVE INTAKE MANIFOLD ASSEMBLY
10. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
11. REMOVE AIR PUMP ASSEMBLY W/ BRACKET
12. REMOVE PRESSURE SENSOR
a. Remove the vacuum hose from the pressure sensor and air switching valve.
b. Remove the 2 bolts and pressure sensor from the air switching valve.
13. REMOVE AIR SWITCHING VALVE
a. Remove the 2 bolts and air switching valve from the air pump bracket.
b. Remove the No.1 air hose from the air switching valve and air pump.
14. INSTALL AIR SWITCHING VALVE
a. Install the No.1 air hose to the air switching valve and air pump.
b. Install the air switching valve with the 2 bolts to the air pump bracket.
Torque: 16 N.m (163 kgf.cm, 12 ft.lbf)
15. INSTALL PRESSURE SENSOR
a. Install the pressure sensor with the 2 bolts to the air switching valve.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Install the vacuum hose to the pressure sensor and air switching valve.
16. INSTALL AIR PUMP ASSEMBLY W/ BRACKET
17. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY
18. INSTALL INTAKE MANIFOLD ASSEMBLY
19. CONNECT HOSES FROM INTAKE MANIFOLD
20. CONNECT CONNECTORS FROM INTAKE MANIFOLD
21. INSTALL FUEL HOSE NO.2
22. INSTALL FUEL HOSE
23. INSTALL AIR CLEANER HOSE ASSEMBLY
24. INSTALL V-BANK COVER SUB-ASSEMBLY
25. ADD ENGINE COOLANT
26. CHECK FOR ENGINE COOLANT LEAKS
27. CHECK FOR FUEL LEAKS