Disassembly and Reassembly

DISASSEMBLY




1. REMOVE AIR INLET SERVOMOTOR
Remove the 3 screws and air inlet servomotor.




2. REMOVE BLOWER MOTOR CONTROL RELAY
a. Disconnect the connector.
b. Remove the screw and blower motor control relay.




3. REMOVE BLOWER MOTOR
a. Disconnect the connector.
b. Remove the 3 screws and blower motor.

4. REMOVE WIRE HARNESS
Remove the screw and wire harness.

REASSEMBLY
Reassembly is in the reverse order of disassembly.