Removal and Installation

Air Conditioning Control Assembly Part 1:

Air Conditioning Control Assembly Part 2:

Air Conditioning Control Assembly Part 3:

REMOVAL




1. REMOVE CENTER CLUSTER FINISH PANEL
Disengage the 9 clips and remove the center cluster finish panel, then disconnect the connector.




2. REMOVE CENTER RESISTORS
Disengage the 6 clips and remove the center resistors both side.




3. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY
a. Remove the 4 bolts.
b. Disengage the 7 clips and remove the integration control panel assembly, then disconnect the connectors.




4. W/ LEXUS navigation system:
REMOVE A/C AMPLIFIER
a. Disconnect the connector clamp.
b. Remove the 3 screws, the 4 bolts and the radio receiver bracket LH.




c. Remove the 2 screws and the A/C amplifier.




5. W/ LEXUS navigation system:
REMOVE EMV
Remove the 2 screws, the 2 bolts and the EMV.

6. W/ LEXUS navigation system:
REMOVE INTEGRATION CONTROL PANEL




a. Disconnect the connector clamps.
b. Remove the screw, the 2 bolts and the radio receiver bracket RH.
c. Remove the integration control panel from the radio receiver.

7. W/O LEXUS navigation system:
REMOVE INTEGRATION CONTROL PANEL




a. Disconnect the connector clamp.
b. Remove the 6 bolts and the radio receiver bracket LH.




c. Disconnect the connector clamp.
d. Remove the 6 bolts and the radio receiver bracket RH.
e. Remove the integration control panel.

INSTALLATION
Installation is in the reverse of removal.

HINT:
W/ LEXUS Navigation System:
When removing/installing or replacing EMV, or when disconnecting/connecting the battery terminal, turn the IG ON and OFF twice for initial display setting.