On Vehicle Inspection
ON-VEHICLE INSPECTION1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR
3. INSPECT INJECTOR RESISTANCE
a. Disconnect the 8 injector connectors.
b. Using an ohmmeter, measure the resistance between the terminals.
Resistance: 13.4 - 14.2 Ohm at 20°C (68°F)
If the resistance is not as specified, replace the injector.
c. Reconnect the 8 injector connectors.
4. REINSTALL INTAKE AIR CONNECTOR
5. REINSTALL V-BANK COVER