Pinout Values and Diagnostic Parameters
TERMINALS OF ECU1. CHECK POSITION CONTROL ECU & SWITCH ASSY
Terminals Of Control Module/Pinouts:
a. Disconnect the P32 and P33 ECU & switch connectors.
b. Check the voltage of each terminal of the wire harness side connectors.
If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the P32 and P33 ECU & switch connectors.
d. Check the voltage of each terminal of the connectors.
If the result is not as specified, the position control ECU & switch may be malfunctioning.