Oil Pump: Specifications

Install the oil pump with the 9 bolts. Tighten the bolts uniformly in several steps.
Torque:
Bolt A 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B 20 Nm (199 kgf-cm, 14 ft. lbs.)
Bolt C 43 Nm (439 kgf-cm, 32 ft. lbs.)

Vane pump assembly x Pump bracket 43 Nm (439 kgf-cm, 32 ft. lbs.)
Vane pump assembly x Adjust strut 43 Nm (439 kgf-cm, 32 ft. lbs.)
Crankshaft position sensor x Oil pump assembly 8.0 Nm (80 kgf-cm, 71 inch lbs.)
Timing belt plate x Oil pump assembly 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Chain tensioner assembly No. 1 x Oil pump assembly 27 Nm (280 kgf-cm, 20 ft. lbs.)
Timing belt No.1 cover x On pump assembly 8.5 Nm (87 kgf-cm, 75 inch lbs.)
Oil pump assembly
at idle speed 29 kPa (0.3 kgf/cm2, 43 psi) or more
at 3,000 rpm 245 to 539 kPa (2.5 to 5.5 kgf/cm2, 36 to 78 psi)
Oil pump assembly
Top clearance
Standard 0.11 to 0.24 mm (0.0043 to 0.0094 inch)
Maximum 0.35 mm (0.0138 inch)
body clearance
Standard 0.125 to 0.162 mm (0.0050 to 0.0064 inch)
Maximum 0.30 mm (0.0118 inch)
Side clearance
Standard 0.03 to 0.09 mm (0.0012 to 0.0035 inch)
Maximum 0.15 mm (0.0059 inch)
Oil pump assembly x Cylinder block
Bolt A 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B 20 Nm (199 kgf-cm, 14 ft. lbs.)
Bolt C 43 Nm (39 kgf-cm, 32 ft. lbs.)
Crankshaft position sensor x Oil pump assembly 8.0 Nm (80 kgf-cm, 71 inch lbs.)
Oil pump rotor set x Oil pump assembly 10 Nm (105 kgf-cm, 8 ft. lbs.)
Oil pump relief valve plug x Oil pump body 49 Nm (500 kgf-cm, 36 ft. lbs.)