V-Ribbed Drive Belt Inspection

INSPECT V-RIBBED BELT





a. Belt deflection:
Pressing force: 98 N (10 kgf, 22 lbs.)





b. Tension

NOTICE:
^ Check the drive belt deflection at the specified point.
^ When installing a new belt, set its tension value as specified.
^ When inspecting a belt which is used for over 5 minutes, apply the specification of "Used belt".
^ When reinstalling a belt which is used for over 5 minutes, adjust its belt deflection and tension to the medium value in each specification of "Used belt".
^ V-ribbed belt tension and deflection value should be checked after 2 revolutions of engine cranking.
^ When using a belt tension gauge, confirm the accuracy first by using a master gauge.