Removal and Installation of Fuel Control Parts

REMOVAL AND INSTALLATION OF FUEL CONTROL PARTS

a. PLACE FOR REMOVING AND INSTALLING OF FUEL SYSTEM PARTS

1. Work in a place with good air ventilation and without anything that could cause combustion around you such as a welder, grinder, drill, electric motor or stove.
2. Never work in a place such as a pit or nearby a pit, as there is a possibility that vaporized fuel will collect in those places.

b. REMOVING AND INSTALLING OF FUEL SYSTEM PARTS

1. Prepare a fire extinguisher before starting operation.
2. To prevent static electricity, install a ground on the fuel changer, vehicle and fuel tank, and do not spray much water so as to prevent slipping.
3. Never use any electric equipment like an electric motor or a working light, as they may create sparks or a high temperature.
4. Never use an iron hammer, as it may create sparks.
5. Dispose of shop rags containing fuel deposits separately.