Without Scan Tool

DTC CHECK (USING SST CHECK WIRE)

a. Check DTCs.




1. Using the SST(s), connect terminals TC and CG of DLC3.

SST 09843-18040

2. Turn the ignition switch to the ON position.







3. Read and record any DTCs from the height control OFF indicator lamp on the combination meter. Refer to the illustration on the left for examples of a normal code and codes 13 and 33.

HINT:
- If the height control OFF indicator lamp does not blink any DTC codes or the normal code, inspect the height control OFF indicator lamp circuit or TC terminal circuit.

Trouble Area
Height control OFF indicator lamp circuit
TC terminal circuit

- If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

4. Refer to the Diagnostic Trouble Code Chart for DTC information.
5. After completing the check, remove the SST(s) from DLC3.

SST 09843-18040