Symptom Index

PROBLEM SYMPTOMS TABLE

HINT: If a normal code is displayed during the diagnostic trouble code check although the trouble still occurs, check the electrical circuits for each symptom in the order given in the charts on the following and proceed to the given troubleshooting.
The Matrix Chart is divided into 3 charts.

- If the instruction "Proceed to next circuit inspection shown on matrix chart" is given in the flow chart of each circuit, proceed to the circuit with the next highest number in the table to continue the check.
- If the trouble still occurs even though there are no abnormalities in any of the other circuits, check and replace the ECM.

Problem Symptoms Table Part 1:

Problem Symptoms Table Part 2:

1. Chart 1: Electronic Circuit Matrix Chart

HINT:
*1: When the circuit on which mark *1 is attached is a malfunction, DTC could be output.
*2: Gate shift lever type
*3: Shift lever with Multi-mode automatic transmission type

Problem Symptoms Table Part 1:

Problem Symptoms Table Part 2:

2. Chart 2: On-Vehicle Repair

Problem Symptoms Table:

3. Chart 3: Off-Vehicle Repair