Differential Mount: Service and Repair

Part 1 Of 2:

Part 2 Of 2:

DIFFERENTIAL MOUNT CUSHION
REPLACEMENT
1. REMOVE DIFFERENTIAL CARRIER ASSEMBLY REAR





2. REMOVE REAR DIFFERENTIAL MOUNT CUSHION NO.1
a. Using SST(s), remove the rear differential mount cushion No.1.
SST 09570-24010, 09316-12010

NOTICE:
^ Do not bring SST(s) into contact with the sub-frame.
^ Do not slant the bolts of SST(s).
^ Do not set the SST(s) in wrong direction.
^ Screw the 2 bolts of SST(s) equally into the 2 holes of the rear differential mount.

HINT: Perform this operation only when the rear differential mount cushion No. 1 is damaged.





3. REMOVE REAR DIFFERENTIAL MOUNT CUSHION NO.2
a. Using SST(s), remove the rear differential mount cushion No 2.
SST 09570-24010, 09316-12010

NOTICE:
^ Do not bring SST(s) into contact with the sub-frame.
^ Do not slant the bolt of SST(s).
^ Do not set the SST(s) in wrong direction.

HINT: Perform this operation only when the rear differential mount cushion No.2 is damaged.





4. INSTALL REAR DIFFERENTIAL MOUNT CUSHION NO.1
a. Using SST(s), install a new rear differential mount cushion No.1.
SST 09570-24010, 09316-12010

NOTICE: Do not set the SST(s) in wrong direction.

HINT: Perform this operation only when the rear differential mount cushion No.1 is replaced.





5. INSTALL REAR DIFFERENTIAL MOUNT CUSHION NO.2
a. Using SST(s), install a new rear differential mount cushion No.2.
SST 09570-24010, 09316-12010

NOTICE:
^ Do not set the SST(s) in wrong direction.

HINT: Perform this operation only when the rear differential mount cushion No.2 is replaced.

6. INSTALL DIFFERENTIAL CARRIER ASSEMBLY REAR