Rear Wiper Motor Assy
REAR WIPER MOTOR ASSEMBLYREPLACEMENT
1. REMOVE REAR WIPER ARM COVER
2. REMOVE REAR WIPER ARM ASSEMBLY
a. Remove the nut and the rear wiper arm assembly.
3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER
4. REMOVE REAR WIPER MOTOR ASSEMBLY
a. Remove the 3 bolts.
b. Disconnect the connector, and remove the rear wiper motor assembly.
5. INSTALL REAR WIPER MOTOR ASSEMBLY
a. Install the rear wiper motor assembly with the 3 bolts.
Torque: 5.5 Nm (56 kgf.cm, 49 in.lbf)
b. Connect the connector.
6. INSTALL REAR WIPER ARM ASSEMBLY
a. Scrape off the serrated part of the wiper arm with a round file or equivalent.
b. Clean the rear wiper pivot serration with a wire brush.
c. Stop the rear wiper motor assembly at the automatic stop position.
d. Install the rear wiper arm in the position shown in the illustration.
e. Install the rear wiper arm assembly with the nut.
Torque: 5.5 Nm (56 kgf.cm, 49 in.lbf)