Crankshaft Position Sensor: Service and Repair
REPLACEMENT1. REMOVE ENGINE UNDER COVER ASSY (W/ ENGINE UNDER COVER ASSY)
2. REMOVE ENGINE UNDER COVER NO.1
3. REMOVE FRONT FENDER APRON SEAL RH
a. Remove the screw, and then open the front fender liner.
b. Remove the clip and 2 bolts, and then remove the front fender apron seal.
4. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the crankshaft position sensor connector.
b. Remove the bolt, and then remove the crankshaft position sensor.
5. INSTALL CRANKSHAFT POSITION SENSOR
Torque: 8.0 N.m (80 kgf.cm, 71 in.lbf)
6. INSTALL FRONT FENDER APRON SEAL RH
7. INSTALL ENGINE UNDER COVER NO.1
8. INSTALL ENGINE UNDER COVER ASSY (W/ ENGINE UNDER COVER ASSY)