Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> ES 330 V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Alignment Sensor: Service and Repair

HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH

REPLACEMENT

1. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH
a. Disconnect the connector.
b. Align match mark with the one on the height control sensor sub-assembly rear RH and bracket.




c. Remove a nut.




d. Remove the 2 nuts and height control sensor sub-assembly rear RH.

2. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH
a. Install the height control sensor link rear RH with the 2 nuts.

Torque: 8.0 N.m (81 kgf.cm, 71 in.lbf)

b. Align the match mark with the one on the height control sensor sub-assembly rear RH and bracket.
c. Install the height control sensor sub-assembly rear RH

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

d. Connect the connector.
e. When the work like the vehicle height may be changed is performed, for example, removal and installation of the height control sensor, or replacement of the suspension, etc., initialize the sensor, then adjust the optical axis.

3. HEADLIGHT AIM ONLY
pro multis · About Operation CHARM