Air Fuel Ratio Sensor (LH Bank)

AIR FUEL RATIO SENSOR (3MZ-FE (LH BANK))
REPLACEMENT
1. DISCONNECT ENGINE WIRE NO.3 (BATTERY NEGATIVE TERMINAL)
2. REMOVE AIR FUEL RATIO SENSOR





(a) Disconnect the air fuel ratio sensor connector.
(b) Remove the wire harness clamp.





(c) Using SST, remove the air fuel ratio sensor.
SST 09224-00010





3. INSTALL AIR FUEL RATIO SENSOR
(a) Using SST, install the air fuel ratio sensor.
SST 09224-00010
Torque: 44 N-m (449 kgf-cm, 32 ft-lbf)
(b) Install the wire harness clamp.
(c) Connect the air fuel ratio sensor connector.

4. CONNECT ENGINE WIRE NO.3 (BATTERY NEGATIVE TERMINAL)
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
5. CHECK FOR EXHAUST GAS LEAKS
6. SYSTEM INITIALIZATION