Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> GS 300 AWD V6-3.0L (3GR-FSE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> General Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

General Module: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE COOL AIR INTAKE DUCT SEAL
3. REMOVE ENGINE ROOM SIDE COVER LH
4. REMOVE INTEGRATION RELAY




a. Remove the engine room No. 2 relay block cover.
b. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No.2 relay block.

HINT: Tape the screwdriver tip before use.

c. Disconnect the 3 connectors.

INSTALLATION

1. INSTALL INTEGRATION RELAY

a. Connect the 3 connectors.
b. Attach the integration relay to the engine room No. 2 relay block.
c. Install the engine room No. 2 relay block cover.

2. REMOVE ENGINE ROOM SIDE COVER LH
3. REMOVE COOL AIR INTAKE DUCT SEAL
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION

a. Perform initialization. Testing and Inspection

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
pro multis · About Operation CHARM