Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> GS 300 AWD V6-3.0L (3GR-FSE) >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Control Module >> Service and Repair >> Headlight Swivel ECU
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlight Swivel ECU

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE
3. REMOVE HEADLIGHT SWIVEL ECU ASSEMBLY




a. Disconnect the connector.
b. Remove the bolt, nut and ECU.

INSTALLATION

1. INSTALL HEADLIGHT SWIVEL ECU ASSEMBLY




a. Connect the connector.
b. Install the headlight swivel ECU and bolt, nut.

2. INSTALL FRONT DOOR SCUFF PLATE
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. INSPECT SRS WARNING LIGHT
a. Inspect SRS warning light.

6. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT
a. Vehicle preparation for headlight aim adjustment.

7. PREPARATION FOR HEADLIGHT AIMING
a. Preparation for headlight aiming.

8. INSPECT HEADLIGHT
a. Inspect headlight.
pro multis · About Operation CHARM