Seat Belt
TERMINALS OF ECU1. CHECK COMBINATION METER ASSEMBLY
a. Disconnect the K31 meter connector.
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the K31 meter connector.
d. Measure the voltage of the connectors.
If the result is not as specified, the combination meter may have a malfunction.
2. CHECK MULTI-DISPLAY
a. Disconnect the K46 multi-display connector.
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the K46 multi-display connector.
d. Measure the voltage of the connector.
If the result is not as specified, the multi-display may have a malfunction.
3. CENTER AIRBAG SENSOR ASSEMBLY