Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> GS 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING WHEEL NO. 2 COVER LOWER
3. REMOVE STEERING WHEEL NO. 3 COVER LOWER
4. REMOVE STEERING WHEEL PAD
5. REMOVE STEERING WHEEL ASSEMBLY
6. REMOVE CRUISE CONTROL MAIN SWITCH




a. Disconnect the connector.
b. Remove the 2 screws and switch.

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH




a. Install the switch with the 2 screws.

Torque: 1.7 to 3.0 N.m (17 to 31 kgf.cm, 15 to 27 in.lbf)

b. Connect the connector.

2. INSTALL STEERING WHEEL ASSEMBLY
3. INSTALL STEERING WHEEL PAD
4. INSTALL STEERING WHEEL NO. 3 COVER LOWER
5. INSTALL STEERING WHEEL NO. 2 COVER LOWER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

Perform initialization.

8. CHECK SRS WARNING LIGHT
Check the SRS warning light.
pro multis · About Operation CHARM