Calibration
CALIBRATIONNOTICE: Use this procedure to center the steering wheel if:
^ The steering actuator has been replaced,
^ The steering control ECU has been replaced,
^ The steering column or gear has been disconnected, or
^ The steering wheel is still off-center after completing the steering angle sensor initialization.
1. VGRS SYSTEM CALIBRATION PROCEDURE (USING SST CHECK WIRE)
Steps 1 - 3:
Step 3 (Continued) - 6:
Step 6 (Continued) - 8:
Step 8 (Continued) - 10:
2. VGRS SYSTEM CALIBRATION PROCEDURE (USING INTELLIGENT TESTER)
Steps 1 - 2:
Step 2 (Continued):
Step 2 (Continued) - 3:
Step 4:
