Crankshaft, Engine
CrankshaftMain Journal
Diameter
Maximum Taper & Out-of-Round
Crankshaft
Main Journal
Diameter 60.988 to 61.000 mm (2.4011 to 2.4016 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Maximum Circle Runout 0.06 mm (0.0024 inch)
Crank Pin
Diameter 52.992 to 53.000 mm (2.0863 to 2.0866 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Thrust Clearance
Standard 0.04 to 0.24 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Main Bearing Oil Clearance
Standard
No. 1 & No. 4 Journals 0.026 to 0.047 mm (0.0010 to 0.0019
inch)
No. 2 & No. 3 Journals 0.032 to 0.053 mm (0.0013 to 0.0021
inch)
Maximum
No. 1 & No. 4 Journals 0.050 mm (0.0020 inch)
No. 2 & No. 3 Journals 0.060 mm (0.0024 inch)
Main Bearing Cap Lower Bolts
First Pass 61 Nm (622 kgf-cm, 45 ft. lbs.)
Final Pass 90°
Bolt Length:
Main Bearing Cap Side Bolts 26 Nm (265 kgf-cm, 19 ft. lbs.)