Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> LS 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Navigation System >> Testing and Inspection >> Scan Tool Testing and Procedures >> System Check Mode >> DTC Clear/Recheck
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

DTC Clear/Recheck

SYSTEM CHECK MODE (DTC CLEAR/RECHECK)

HINT: Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.

1. Enter the diagnostic mode.
2. Clear DTC




a. Press the "Code CLR" switch for 3 seconds.




b. Check result is cleared.

3. Recheck
a. Press the "Recheck" switch.




b. Confirm that all diagnostic codes are "OK" when the check results are displayed.
If a code other than "OK" is displayed, troubleshoot again.




c. Press the "LAN Mon" switch to change to "LAN Monitor" mode.




d. Confirm that all diagnostic codes are "No Err".
If a code other than "No Err" is displayed, troubleshoot again.
pro multis · About Operation CHARM