Crankshaft Main Bearing

Crankshaft bearing cap bolt tension portion diameter
STD 7.500 to 7.600 mm (0.2953 to 0.2992 inch)
Minimum 7.20 mm (0.2835 inch)
Crankshaft bearing center wall thickness (Reference)
No. 1 and No. 5
Mark 3 2.492 to 2.495 mm (0.0981 to 0.0982 inch)
4 2.495 to 2.498 mm (0.0982 to 0.0983 inch)
5 2.498 to 2.501 mm (0.0983 to 0.0985 inch)
6 2.501 to 2.504 mm (0.0985 to 0.0986 inch)
7 2.504 to 2.507 mm (0.0986 to 0.0987 inch)
Others
Mark 1 2.486 to 2.489 mm (0.0979 to 0.0980 inch)
2 2.489 to 2.492 mm (0.0980 to 0.0981 inch)
3 2.492 to 2.495 mm (0.0981 to 0.0982 inch)
4 2.495 to 2.498 mm (0.0982 to 0.0983 inch)
5 2.498 to 2.501 mm (0.0983 to 0.0985 inch)
Crankshaft bearing cap bolt tension portion diameter
STD 7.500 to 7.600 mm (0.2953 to 0.2992 inch)
Minimum 7.20 mm (0.2835 inch)
Crankshaft bearing cap x Cylinder block 2 progressive type
1st 27 Nm (275 kgf-cm, 20 ft. lbs.)
2nd Turn 90°, Turn 90°, Turn 90°
Others 49 Nm (500 kgf-cm, 36 ft. lbs.)





Crankshaft bearing cap bolts