Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> RX 330 AWD V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Service and Repair >> Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Procedures

HEADLAMP ASSEMBLY

REPAIR
1. INSTALL HEADLIGHT PROTECTOR RETAINER UPPER

HINT:
- If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
- Ensure that the headlight assembly is not damaged.




a. Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part, place the headlight protector retainer upper against the bosses and gradually file away until installation is possible.




b. Install the headlight protector retainer upper with the 2 screws.

2. INSTALL HEADLIGHT PLATE

HINT:
- If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
- Ensure that the headlight assembly is not damaged.




a. Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part, place the headlight plate against the bosses and gradually file away until installation is possible.




b. Install the headlight plate with the screw.

3. INSTALL HEADLIGHT PROTECTOR RETAINER LOWER

HINT:
- If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
- Ensure that the headlight assembly is not damaged.




a. Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part, place the headlight protector retainer lower against the bosses and gradually file away until installation is possible.




b. Install the headlight protector retainer lower with the screw.

4. INSTALL HEADLIGHT BRACKET LOWER

HINT:
- If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
- Ensure that the headlight assembly is not damaged.




a. Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTE: After cutting off the part, place the headlight bracket lower against the bosses and gradually file away until installation is possible.




b. Install the headlight bracket lower with the 2 screws.
pro multis · About Operation CHARM