Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2006 >> SC 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Tire Monitoring System >> Tire Pressure Module >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement






REPLACEMENT
1. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE CONSOLE UPPER PANEL GARNISH REAR
4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER
7. CONFIRM RADIO RECEIVER ASSEMBLY SHIPMENT MODE SETTING





8. REMOVE TIRE PRESSURE MONITOR RECEIVER ASSEMBLY
a. Disconnect the 2 connectors.
b. Remove the 2 bolts and receiver.





9. INSTALL TIRE PRESSURE MONITOR RECEIVER ASSEMBLY
a. Install the receiver with the 2 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
b. Connect the 2 connectors.
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. PERFORM INITIALIZATION

NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

12. INSPECT TIRE PRESSURE WARNING SYSTEM



pro multis · About Operation CHARM