Crankshaft, Engine

Crankshaft
Maximum circle runout 0.08 mm (0.0031 inch)





Main journal diameter 66.988 to 67.000 mm (2.6373 to 2.6378 inch)
Crank pin diameter 51.982 to 52.000 mm (2.0465 to 2.0472 inch)
Maximum taper and out-of-round 0.02 mm (0.0008 inch)

Crankshaft Bearing Cap Set Bolt
Standard diameter 7.500 to 7.600 mm (0.2953 to 0.2992 inch)
Minimum diameter 7.20 mm (0.2835 inch)

Crankshaft Thrust Clearance
Standard thrust clearance 0.020 to 0.220 mm (0.0008 to 0.0087 inch)
Maximum thrust clearance 0.30 mm (0.0118 inch)
Thrust washer thickness 2.440 to 2.490 mm (0.0961 to 0.0980 inch)