Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Engine Coolant Temperature Sensor:

REMOVAL

1. REMOVE ENGINE UNDER COVER LH
2. REMOVE ENGINE UNDER COVER RH
3. DRAIN ENGINE COOLANT
4. REMOVE V-BANK COVER SUB-ASSEMBLY
5. REMOVE COOL AIR INTAKE DUCT SEAL
6. REMOVE ENGINE ROOM SIDE COVER LH
7. REMOVE AIR CLEANER INLET ASSEMBLY
8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
10. REMOVE NO. 1 AIR CLEANER INLET
11. REMOVE ENGINE COOLANT TEMPERATURE SENSOR




a. Remove the engine coolant temperature sensor connector.
b. Remove the engine coolant temperature sensor.
c. Remove the gasket from the engine coolant temperature sensor.

INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
a. Install a new gasket to the engine coolant temperature sensor.




b. Install the engine coolant temperature sensor.

Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)

c. Connect the engine coolant temperature sensor connector.

2. INSTALL NO. 1 AIR CLEANER INLET
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
5. INSTALL AIR CLEANER INLET ASSEMBLY
6. ADD ENGINE COOLANT
7. CHECK FOR ENGINE COOLANT LEAKS
8. INSTALL ENGINE ROOM SIDE COVER LH
9. INSTALL COOL AIR INTAKE DUCT SEAL
10. INSTALL V-BANK COVER SUB-ASSEMBLY
11. INSTALL ENGINE UNDER COVER RH
12. INSTALL ENGINE UNDER COVER LH