Short in CAN Bus Lines
Short in CAN Bus LinesDESCRIPTION
The CAN bus wires are considered to be shorted when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is below 54 Ohm.
Wiring Diagram (Part 1):
Wiring Diagram (Part 2):
Step 1:
Step 2-3:
Step 3 (Continued):
Step 3 (Continued):
Step 3 (Continued)-4:
Step 4 (Continued)-7:
Step 7 (Continued)-8:
Step 8 (Continued)-9:
Step 9 (Continued)-10:
Step 10 (Continued):
Step 11-13:
Step 13 (Continued):
INSPECTION PROCEDURE
NOTE: Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the engine switch, any other switches, or the doors. If any doors need to be opened in order to check connectors, open the doors and leave them open.