Short to B+ in CAN Bus Line

Short to B+ in CAN Bus Line

DESCRIPTION




A short to B+ is suspected in the CAN bus wire when the resistance between terminals 6 (CANH) and 16 (BAT), or terminals 14 (CANL) and 16 (BAT) of the DLC3 is below 6 k Ohms.

Wiring Diagram (Part 1):

Wiring Diagram (Part 2):

Step 1:

Step 2-3:

Step 3 (Continued):

Step 3 (Continued):

Step 3 (Continued)-4:

Step 4 (Continued)-5:

Step 5 (Continued)-6:

Step 6 (Continued)-7:

Step 7 (Continued)-8:

INSPECTION PROCEDURE

NOTE: Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the engine switch, any other switches, or the doors. If any doors need to be opened in order to check connectors, open the doors and leave them open.