Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> ES 350 V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Air Fuel Ratio Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Fuel Ratio Sensor

Air Fuel Ratio Sensor:





REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR




a. Disconnect the 2 air fuel ratio sensor connectors.
b. Using SST, remove the 2 air fuel ratio sensors from the front pipe assembly.

SST 09224-00010

INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR




a. Using SST, install the 2 air fuel ratio sensors to the front pipe assembly.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)

NOTE: The torque shown should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST.

b. Connect the 2 air fuel ratio sensor connectors.
pro multis · About Operation CHARM