Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> ES 350 V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Oxygen Sensor

Heated Oxygen Sensor:





REMOVAL

1. REMOVE ENGINE UNDER COVER LH
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE EXHAUST PIPE NO. 1 SUPPORT BRACKET
4. REMOVE FRONT EXHAUST PIPE ASSEMBLY
5. REMOVE HEATED OXYGEN SENSOR (for Bank 1)




a. Using SST, remove the oxygen sensor.

SST 09224-00010

6. REMOVE HEATED OXYGEN SENSOR (for Bank 2)




a. Using SST, remove the oxygen sensor.

SST 09224-00010

INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR (for Bank 2)




a. Using SST, install the heated oxygen sensor.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)

NOTE: The torque shown should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST.

2. INSTALL HEATED OXYGEN SENSOR (for Bank 1)




a. Using SST, install the heated oxygen sensor.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)

NOTE: The torque shown should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST.

3. INSTALL FRONT EXHAUST PIPE ASSEMBLY
4. INSTALL EXHAUST PIPE NO. 1 SUPPORT BRACKET
5. INSTALL ENGINE UNDER COVER LH
6. INSTALL ENGINE UNDER COVER RH
pro multis · About Operation CHARM