Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Canada - A/T - U660E Compensation Code Input Process

Bulletin
TSB2271

Issue Date
November 17, 2006

Title
U660E AUTOMATIC TRANSAXLE COMPENSATION CODE INPUT PROCESS

Component
AUTOMATIC TRANSAXLE

Models
'07 ES 350

INTRODUCTION:

2007 model year ES 350 vehicles are equipped with a U660E (6-speed) transaxle. These transaxles are tested and marked with an automatic transaxle compensation value to improve drivability and reduce the amount of time needed to complete the Transmission Control Module (TCM) "Learning" process.

CAUTION:
The transaxle compensation value registration process MUST be performed anytime one of the following components are replaced:
- Transaxle
- Transmission Control Module (TCM)

Failure to follow the procedure below may lengthen the time to complete the TCM "Learning" process, potentially resulting in performance concerns.


APPLICABLE VEHICLES:
- 2007 model year ES 350 vehicles equipped with the U660E (6-speed) automatic transaxle.






REQUIRED SSTs:






WARRANTY INFORMATION:

REGISTRATION PROCEDURE:

Refer to ETAS, 2007 model year ES 350 Repair Manual: U660E Automatic Transaxle: Automatic Transaxle System: Manual Shifting Test, Registration.

NOTE:
If the transaxle is installed in the vehicle and the QR Code Label cannot be read, it may be necessary to remove the battery and battery tray to access the QR Code Label.







LETTER INPUT CHART: