Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> ES 350 V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Mounted Controls Transmitter >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Mounted Controls Transmitter: Service and Repair

Steering Pad Switch:




STEERING PAD SWITCH

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. REMOVE LOWER NO.3 STEERING WHEEL COVER
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER
4. REMOVE STEERING PAD
5. REMOVE STEERING PAD SWITCH ASSEMBLY

a. Disconnect the pad switch connector from the spiral cable.




b. Remove the 2 screws.
c. Disengage the 4 claws and remove the steering pad switch assembly.

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY




a. Engage the 4 claws.
b. Install the steering pad switch assembly with the 2 screws.

Torque: 2.4 N.m (25 kgf.cm, 21 in.lbf)

c. Connect the connector to the spiral cable.

2. INSTALL STEERING PAD
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT SRS WARNING LIGHT
7. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.
pro multis · About Operation CHARM