Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Relay: Service and Repair

Wiper Relay:




WIPER RELAY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
3. REMOVE FRONT DOOR SCUFF PLATE RH
4. REMOVE FRONT DOOR OPENING TRIM COVER RH
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
6. REMOVE SIDE INSTRUMENT PANEL RH
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
8. REMOVE LOWER INSTRUMENT PANEL RH
9. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY




a. Disconnect the connector.
b. Remove the nut and the windshield wiper relay assembly.

INSTALLATION

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY




a. Install the windshield wiper relay assembly with the nut.
b. Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL RH
3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
4. INSTALL SIDE INSTRUMENT PANEL RH
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
6. INSTALL FRONT DOOR OPENING TRIM COVER RH
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
11. INSPECT SRS WARNING LIGHT
12. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.