Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Switch: Service and Repair

Wiper Switch:




WIPER SWITCH

REMOVAL




1. REMOVE STEERING COLUMN COVER (for Manual Tilt and Telescopic)
a. The steering wheel assembly is turned to the right and remove the screw as shown in the illustration.




b. The steering wheel assembly is turned to the left and remove the screw as shown in the illustration.




c. Disengage the 2 claws and remove the steering column cover lower.




d. Disengage the 4 clips and 3 claws to remove the steering column cover upper.




2. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)
a. The steering wheel assembly is turned to the right and remove the screw as shown in the illustration.




b. The steering wheel assembly is turned to the left and remove the screw as shown in the illustration.




c. Disengage the 2 claws and remove the screw and the steering column cover lower.




d. Disengage the 4 clips and 3 claws to remove the steering column cover upper.




3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
a. Disconnect the 2 connectors.
b. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

NOTE: If the claw is pushed with excessive force, it may break.

INSTALLATION




1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
a. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
b. Connect the 2 connectors.




2. INSTALL STEERING COLUMN COVER (for Manual Tilt and Telescopic) a. Engage the 3 claws and the 4 clips.




b. Engage the 2 claws and install the 2 screws to the steering column cover.




3. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)
a. Engage the 3 claws and the 4 clips.




b. Engage the 2 claws and install the 3 screws to the steering column cover.

NOTE: Do not damage the tilt and telescopic switch.
pro multis · About Operation CHARM