Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> IS 250 RWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Fuel Delivery and Air Induction >> Secondary Injector Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Secondary Injector Control Module: Service and Repair

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE NO. 1 INLET AIR CLEANER
3. REMOVE NO. 1 ENGINE COVER

4. REMOVE INJECTOR DRIVER




a. Disconnect the 4 connectors from the injector driver.




b. Remove the bolt, 2 nuts and injector driver.

NOTE: Be careful not to drop or strike the injector driver.

INSTALLATION

1. INSTALL INJECTOR DRIVER




a. Install the injector driver with the bolt and 2 nuts.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

NOTE
- Be careful not to drop or strike the injector driver.
- The injector driver is grounded at the bolt and nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of the injector driver and engine before installing the injector driver.




b. Connect the 4 connectors to the injector driver.

2. INSTALL NO. 1 ENGINE COVER
3. INSTALL NO. 1 INLET AIR CLEANER
4. INSTALL COOL AIR INTAKE DUCT SEAL
pro multis · About Operation CHARM