Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> LS 460 V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Cruise Control >> Distance Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Distance Sensor: Service and Repair

Millimeter Wave Radar Sensor:




MILLIMETER WAVE RADAR SENSOR

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE ENGINE ROOM SIDE COVER LH
4. REMOVE ENGINE ROOM SIDE COVER RH
5. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
6. REMOVE COOL AIR INTAKE DUCT SEAL
7. REMOVE RADIATOR GRILLE ASSEMBLY




8. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
a. Disconnect the sensor connector.
b. Remove the 3 bolts and sensor.

INSTALLATION




1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
a. Install the sensor with the 3 bolts.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

b. Connect the sensor connector.

2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
3. INSTALL RADIATOR GRILLE ASSEMBLY
4. INSTALL COOL AIR INTAKE DUCT SEAL
5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
6. INSTALL ENGINE ROOM SIDE COVER LH
7. INSTALL ENGINE ROOM SIDE COVER RH
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. INSTALL COWL TOP VENTILATOR LOUVER RH
10. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
pro multis · About Operation CHARM