Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> LS 460 V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Scan Tool Testing and Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool Testing and Procedures

DATA LIST / ACTIVE TEST

1. READ DATA LIST

HINT: Using the intelligent tester or Techstream to read the DATA LIST allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.

NOTE: In the table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

a. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
b. Turn the engine switch on (IG) and turn the tester on.

c. Enter the following menus.
1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DATA LIST / ALL /
2. Techstream - Select: Body / (desired system) / Data List /




Part 1:




Part 2:




























d. According to the display on tester, read the "DATA LIST" or "Data List".
1. Intelligent tester
2. Techstream
pro multis · About Operation CHARM